Everything You Need To Be Aware Of Security Lock For Van

Choosing the Right Security Lock For Your Van

The right security lock can deter thieves and protect your cargo. Some locks are designed for DIY installation, while others might require assistance from a professional to ensure that they are fitted correctly and provide maximum security.

Slam locks are ideal for couriers who make multiple deliveries. They lock automatically when the door is slammed shut. Deadlocks work with your manufacturer lock and offer an additional layer of security.

Deadlocks

Van dead locks are a second physical security measure that acts as a strong deterrent to criminals. These locks are made for aftermarket use and extend through the van door. They attach to the frame, so they aren't able to be opened without the use of a key. These locks are especially useful for vans that need to be kept for a long period of time, or carry expensive equipment.

They're ideal for tradespeople who prefer the remote locking system that comes with the factory in the day, but want to add an extra layer of security overnight, or when they feel their vehicle is in a risky place. When a key is used to operate them the bolt is thrown into a receiver that is attached to the opposite body section of the vehicle. This adds an additional layer of security over the factory locks.

Unlike Slam locks and Hook Locks (both also available through our online store) which can be locked automatically when the door is shut These locks require the driver to manually operate with the supplied key. A straight bar lock can be fitted to rear doors and twin sliding doors, while hook locks are suitable for front or rear doors of small to medium-sized vans.

Both are designed to stop a burglar from attempting to open the lock by force it to open, something that could otherwise allow them access to your vehicle's cab or load area. They're designed specifically for each van model and are placed in the most optimal position to provide an extra layer of protection against certain attack techniques.

The repercussions of van theft is important, particularly for professionals such as tradesmen and contractors who rely on vehicles to transport essential equipment and tools they can't afford to lose. Apart from the cost to replace stolen items, it can cause loss of income due to unplanned downtime as well as the hassle of arranging alternative transport options. Installing a van lock that is of good quality will protect your assets, reduce the risk and discourage thieves. It may even help you save on insurance premiums.

Hook Locks

A hook lock for vans is an effective security measure that can be hung on the door of your vehicle. It works independently from the locks of the manufacturer and can only be operated by a key that is fully controlled by the driver. It features a hook-shaped bolt that can't be forced to open and is constructed from top-quality materials. It is also highly resistant against manipulation and drilling. Sold Secure is the UK's most trusted security testing body. Many models have been designed to meet police specifications and are certified by Sold Secure.

When you are looking to purchase a security lock for your van, be aware of the level of security you require. If you're carrying expensive tools or delicate cargo then a more advanced lock like an slam or deadlock, will be better suited. If you are only transporting items of a lesser value, then a basic slamlock may be sufficient. Also, you should check your insurance policy to make sure that the addition of additional locking mechanisms won't cause it to be cancelled.

When you are choosing a security lock system, you should also consider its weather resistance. Since vans are often exposed to the elements, your locks must be able to withstand various weather conditions. Therefore, they won't lose their effectiveness or become more susceptible to being manipulated by thieves. In addition, it is important to keep up with software updates for electronic locking systems in order to guard against security vulnerabilities and enhance their effectiveness.

It's important to choose locks that are easy to install. Some locks are designed to allow DIY installation while others need professional installation to ensure they're installed correctly and function in the way they were intended to. Your level of skill, confidence and the resources you have available will determine if a professional is needed to install the product.

Catalytic converter locks

Catalytic converters can reduce harmful emissions from your car. However, this vital part is also an easy target for thieves because of the precious metals it contains. The black market value of these valuable materials has led to an increase in the amount of stolen converters. There are preventive measures to help combat this problem.

Many people may assume that an alarm system that is simple will do the trick, but these systems tend to be less effective than a dedicated device designed specifically to safeguard your converter. These devices are made to detect heat or vibrations and then emit a loud sound to deter thieves. These devices are more similar to deterrents than protection systems, and tend to cost more than a standard lock.

The patented design of the Cat Clamp converter lock is an established and tested solution to prevent catalytic converter theft. The device is constructed of stainless steel wire that is wrapped around the catalytic converter and the frame of the car. The cable is twisted up to seven times and locked making it very difficult for thieves to remove the converter. This unit can be installed in less than 30 minutes, and it does not require drilling or welding. It is simple to install on a variety of vehicles and is suitable for use on cars, trucks and SUVs, vans and other vehicles with a catalytic converter.

A metal plate that covers the entire catalytic converter unit is another option to protect it. While it is not as easy to put in as a cage made of metal however, it makes the converter much more difficult to take. These plates can cost anywhere between $150 and $270, depending on the manufacturer.

Keep in mind that no security device is perfect however, taking preventive steps will lower the risk of theft. It is essential to take the time to secure your van properly. This will keep you and your possessions safe and save you money by replacing expensive components. It is a good idea to have your catalytic convert marked with your VIN, since it will allow you to identify it when it is reclaimed and resold.

Anti-Peel Kits

This product is designed to guard against the well-known "Peel and Steal" method. It is placed on the front edge of a vehicle's side-load door. This increases the resistance of your van's doors to 'peel-and more info steal' attacks by up to 300 percent. The L4V Anti-Peel Kit, in conjunction with a high-positioned hook lock, decreases the risk that thieves will gain entry to your van via the side-loading door.

With new and brash ways of van theft and the rate of crime increasing, it is imperative that additional van security measures are utilized. One of the most recent methods is referred to as 'peel and steal' and involves thieves stealing tools and goods from vans in seconds by applying pressure to the doors using their knees, then pulling, bending and prising them open to reveal the contents of the area. This kind of attack has become commonplace, costing UK tradespeople thousands of pounds worth of tools and inventory.

At Locks 4 Vans we have launched a new combined high hook lock with an anti peel kit for the Ford Custom to provide a cost-effective solution to this growing problem. The Anti-Peel Kit is fitted to the barn door of your Ford Custom reducing the chance of "peel and steal" attacks by strengthening the door skin and adding an additional layer of security. The high-quality L4V hook locks are installed into the barn door to help strengthen it and ensure it's secure in the event that the anti-peel plate is removed.

Our anti-peel kits are available for purchase online and delivered directly to your van in a just a few days. Our technicians will install the products. We have installers located in Greater Manchester and Tameside so we can provide our services to areas like Manchester, Salford, Stockport, Ashton Under Lyne, Oldham and Rochdale.

If you would like more information about improving the security of your van contact us now. We offer a range of options to enhance the security of your van. These include deadlocks, armour locks, and shielding to stop puncture attacks.